Navigated Table of Contents
Change Tires On ATV: Step-by-step Guidelines on How To Change Tires On ATV
Change Tires On ATV: Step-by-step Guidelines on How To Change Tires On ATV easily without facing any physical challenges or difficulties.
Before getting to that, though, let us quickly cover what is considered by many to be the hardest part of changing your ATV tires; breaking your tire seal.
The second hardest part about changing your hand-driven ATV tire is getting it back onto your rim again, and getting the bead right. This is probably the hardest part of changing ATV or UTV tires, as the bead is positioned much tighter to the rim on a dirt tire versus a street tire.
Steps to Note
The only really tough parts about changing ATV/UTV tires are breaking off the bead, and then re-inflating the tires, and setting the bead.
Ok, so you popped your tires on your rims, and now you have to seat your tires and align your beads properly. Once you have gotten the top of the tire onto the rim, it should easily pull the other bead upward.
The entire purpose of slashing is to remove the bead from the rim, then remove the tire. In short, what you are doing in this step is getting the tire bead off of the wheel rim so you can remove the tire.
Installing Your ATV Tires
Now that you have gotten your tire off, you are going to want to scrape off the lip of your rim, which is where your new tire bead will be.
Before you begin installing your new tires, you will need to ensure the rim bead is smooth and clean.
You only need to use bead sealer if you believe the tire bead is not sealing properly over the rim itself. A bead sealer makes the tire harder to get off the next time you make your tire change, though.
Fortunately, lowering your tires makes it easy to take off your bead tires. One method for removing the second side of your tire is to ensure that the bead and the rim are well-oiled and then press one section of your tire down to its center drop, pulling the other side of your tire away from the rim.
READ; Mud Tires: 6 Best Mud Tires For The Road
Repeat this process until the tire moves inside and you can press it down to the center of the drop in the rim. If you have rims with a threaded bead, you are lucky, you will just need to crack a bead inside of the rim. The secret to making a simple swap is lubrication.
A second pry bar may be used to help keep the tire secure, to keep it from sliding back underneath the rim.
The ATV tire changing process can be challenging and time-consuming at first thanks to stout tire beads, but it is worth the time spent making sure that your tires are safe and ready for the outdoors.
If you have been thinking of changing ATV tires or UTV tires at home, know that although it may be difficult the first few times since these tires typically have stronger beadings than road tires, it is a fairly straightforward process if you have the right tools, and you follow this detailed guide by tire experts AutoNewBlog.
Change Tires On ATV Video Guide: How To Change Tires On ATV at Home
The tires on an ATV are one of the most important parts of the machine. They are what allow you to ride across different types of terrain and will give you the traction that you need when going off-road.
That is why it is important for you to know how to change your tires on an ATV in case they ever need to be replaced yourself.
Changing tires on an ATV is not a difficult process, but it does take some time and patience. You will need a jack, a lug wrench, and tire irons in order to do this correctly.
READ; Best Tires for Ram 1500 Overview 2022
It may also be helpful if you have someone else assisting with this process because it can be difficult for one person to do it alone. However, use the video guide below:
Conclusion
Some of the most important things that you need to know about changing tires on an ATV are the type of jack, tire irons, and lug wrench.
They are all very important in order to change your tires on an ATV. The most important thing to know about changing your tires on an ATV is to use a jack.
If you do not have a jack, then you can use any other type of device that can support the weight of the ATV.
For example, if you want to change your tire without using a jack and without lug wrenches, then you can lay down sandbags in order to raise the vehicle and change its tire. We believe this article is useful to you? If you have any questions, use the comment box below:
