Navigated Table of Contents
Break Bead On An ATV Tire: Break The Bead On An ATV Tire | How To Break The Bead On An Atv Tire Guideline.
Break Bead On An ATV Tire: The Bead On An ATV Tire and the step-by-step guide on how to Break the Bead On An Atv Tire is what you are about to learn in this article.
Before we get into the process of breaking the bead off your tires with your hands, the first step is putting your tires down.
What is a tire bead?
If you are going to break a tire bead, I guess you need to know what the bead is first.
If you look at a rim, right next to the lip, there is a bump, called a “bump heel”. This goes around the entire rim to hold the tire in place. It does this by clinging to the tire in what is called the bead.
If you look inside a tire, the bead is where you see the indentation. In this dash, sturdy cables run through the tire, creating a forced ring that connects the bead to the rim.
When a tire connects to the rim, it is pressed against this bead retainer and rests against the lip. This ensures that the tire does not slide in different directions on the rim. I guess I never thought this would happen, but it’s important not to spin the tire while driving!
Tire Tools you can use to Break your Mountain Bike Tire Bead
First of all, we remember that there are several different options when it comes to the tools that help you break the heel.
Some are more expensive and some are very cheap, but with the budget options, you are likely to find major downsides in terms of safety, risk, or ease of use.
As mentioned above, our favorite tool to use is BeadBuster. The BeadBuster company has created a tool that locks onto the rim and applies to wedge force to the rim and tire. This forces the heel to drop above the heel stopper.
Many other tools can damage the tire or wheel by pressing on the sidewall of the tire.
The BeadBuster presses directly against the bead of the tire, greatly reducing any chance of damaging the tire or rim.
As you’d expect, the Beadbuster is the most expensive option of the group of tools we’ll be discussing, but it’s the closest option with which we believe we can make it a shop repair and this tool will save you a lot more tire repairs over many years of ATV riding. Click here to see the current price of Beadbuster on Amazon.
You can use a portable bead breaker or a tire changer.
You’ve probably seen them at hardware or automotive supply stores. They are generally a little cheaper than other options and work well with certain tire sizes.
The problem is that they have trouble breaking the bead of mountain bike tires. ATV tires often have a much stronger bead than other vehicles due to extreme trail use and exhaust.
READ; Change Tires On ATV: No 1 Change Tires On ATV
The bead retainer is much stronger on mountain bikes than others and this tool can just slide along the sidewall of the tire instead of breaking the bead.
You may end up risking the gum and getting frustrated if your attempts fail.
You can help the process by using the soapy water trick we mentioned first, and another trick is to leave some air in the tire. Leave no more than 3-5 psi in the tire, but this will allow you to use more pressure before the tool begins to slip.
There are many other heel-busting tools on the market, but we haven’t tried them all. If you want something stronger than a Bead Buster, but not as expensive as the BeadBuster, explore some of these options on Amazon and let us know if you find one you like
Break Bead On An ATV Tire Guidelines
As we mentioned above that before we get into the process of breaking the bead off your tires with your hands, the first step is putting your tires down.
The next step that leads into how to break a tire bead by hand is to prepare the area around the inside circle of the tire.
Before breaking a bead in your motorcycle or another kind of car tire, you must set your wheel down on a flat, solid surface.
When learning to break tire beads manually, understand there is the possibility that you may hurt yourself or your wheels.
READ; Best Tires for Ram 1500 Overview 2022
Because a tire bead is held tightly against the rim with steel cables and glue, you have to apply lots of force to break the bond.
You might want to use 2x4s positioned as close as possible to the rim of your vehicle in order to drive the tire edges off of the bead.
The tire bead needs to be placed on a drop-in well, otherwise, you are going to have trouble getting it past the rim lip.
Use your soapy solution, together with your pry bar, to pull the bead above the lip underneath the rim. Once you have got the tire top above the rim, the other beads should easily pop off.
Get Tire Already over a Rim
To get a tire already over a rim, you will need to use a bead breaker or tire changer. To make a second bead to pry through the lip of the rim, you need to use your tire scoop, working around the tire until you get a full bead pried through the rim.
The bead might have been set so snugly, this tool, rather than breaking the bead, will simply slide over it and ride it up the tire sidewall.
The BeadBuster is patented for breaking the bead in tires, such as the ones found on quads. Even after applying those tricks, you might find that the tool struggles to break beads in more recalcitrant ATV tires.
That bead hold is much stronger on the ATV than it is on others, and the tool might simply slide along the sidewalls of your tires rather than breaking your ATVs tire bead.
If using another tool, then just pull the bead off of the tire in the manner that tool is designed for, but chances are, very similarly.
To make sure that your tire slides easily, apply some commercial tire lube or a little soapy water on the bead catchers on either side of your rim.
An even better alternative is to use a thin coating of baby powder on the lip of your rim and the tire bead.
Using one tool, keep one part of your tire off of the wheel well, while using another tool, shave the remaining part of your tire down to the edge of the wheel well.
Bead holders are small tools that will come in handy as you are trying to fit the tire onto a rim. A bead holder for stubborn tires has a solid bond with the rim thanks to steel cables and a special adhesive.
Summary of Break Bead On An ATV Tire
The process of breaking a bead on a tire has been accomplished in different ways, but it is, we believe, the best and safest process to do so.
You don’t need a tire lever that you would find in a workshop. All you need is a valve stem tool, some means of spraying the tire, and a bead breaker tool.
1. Place the tire on a solid surface. Use the valve stem tool on the tire valve to drain it. The tool is cheap (check current options and prices on Amazon) and will save you a lot of time.
There are other ways to deflate the tire like pushing the pin, but it will take forever. Using the tool will only take a few seconds.
2. Get a spray bottle with a mix of soap and water or tire mounting lubricant paste. The lubricant works a little better, but if you don’t have it, just use soap and water.
3. Now is the time to get your bead breaker tool. We’ll look at more options below, but the best option for you, if you can afford it, is the BeadBuster. This tool is patented specifically for the purpose of breaking the bead of a tire such as those of mountain bikes.
4. If you’re using the BeadBuster, set it between the rim and the sidewall.
Then press the tool against the tire and depress the piston using a power tool. This will remove the tire from the bead. If you are using a different tool, separate the bead from the tire the way the tool is intended to be used, but it will likely be in a very similar way. You can also create your own instrument with a little ingenuity.
5. Spray a second area of the strain and repeat the process. You may only need it twice, but up to five times.
Once the tire is detached from the bead, flip the tire over and repeat steps 2-5 on that side.