Navigated Table of Contents
2008 ford edge oil filter: Oil type
The 2008 Ford Edge is a midsize crossover SUV that was produced by the American automaker Ford. One of the regular maintenance items that must be performed on this vehicle is the replacement of the oil filter. The oil filter is an important component that helps to remove dirt and debris from the engine oil, keeping the engine lubricated and running smoothly.
When it comes to replacing the oil filter on a 2008 Ford Edge, it is recommended to use a high-quality, OEM (original equipment manufacturer) filter. OEM filters are designed specifically for the make and model of the vehicle, ensuring a proper fit and function.
The oil filter is located on the driver’s side of the engine, usually in housing near the oil pan. To replace the oil filter, the first step is to drain the old oil from the engine. Once the oil has been drained, the oil filter housing can be unscrewed and the old filter removed. The new filter is then installed and the housing is re-screwed in place. It’s important to make sure the filter is installed correctly and tightened securely to prevent oil leaks.
It’s also recommended to change the oil at the same time as changing the oil filter. This will ensure that the engine is receiving clean, fresh oil to lubricate its moving parts. The 2008 Ford Edge typically requires 5W-20 or 5W-30 motor oil with API certification “SN” and meeting Ford specification WSS-M2C946-A.
Overall, changing the oil filter on a 2008 Ford Edge is a relatively simple task that can be performed by the vehicle owner or by a professional mechanic. It is an important part of regular maintenance that helps to keep the engine running smoothly and prolong the life of the vehicle.
Read the related article post on Oil filter for Nissan Altima 2011: How to fill Oil filter
2008 ford edge oil capacity
The oil capacity for a 2008 Ford Edge with a 3.5-liter V6 engine is typically around 5.5 quarts (5.2 liters) with a filter change. It’s important to note that this can vary depending on the specific trim level of the vehicle and if the vehicle is equipped with any special features such as a towing package or four-wheel drive. It’s always recommended to check the owner’s manual or consult with a Ford dealership to confirm the specific oil capacity for your 2008 Ford Edge.
It’s also important to use the recommended oil viscosity and specification as specified by the manufacturer. In the case of the 2008 Ford Edge with a 3.5-liter V6 engine, it requires 5W-20 or 5W-30 motor oil with API certification “SN” and meeting Ford specification WSS-M2C946-A. It’s also recommended to use a synthetic blend or full synthetic oil to ensure the best protection and performance for the engine.
Read related article posts on 2017 Subaru outback oil reset: Low light
2008 ford edge oil type
The 2008 Ford Edge with a 3.5-liter V6 engine requires 5W-20 or 5W-30 motor oil with API certification “SN” and meeting Ford specification WSS-M2C946-A. This motor oil should be API certified, which means it has passed industry standards for performance and protection set by the American Petroleum Institute (API). The “SN” on the API certification indicates that the oil is suitable for use in vehicles that were manufactured after 2010, it also meets the latest ILSAC (International Lubricant Standardization and Approval Committee) standards for fuel economy and emissions reduction.
It’s also recommended to use a synthetic blend or full synthetic oil for the best protection and performance for the engine. Synthetic oil is made from artificially-produced chemicals, rather than natural crude oil, and is designed to provide better protection at higher temperatures and longer intervals between oil changes.
It’s important to always use the recommended oil type and viscosity as specified by the vehicle’s manufacturer to ensure the best performance and protection for the engine. Always consult the owner’s manual or speak with a Ford dealership to confirm the specific oil type and viscosity required for your 2008 Ford Edge.
Read a related article on How to unstick oil pressure relief valve: Solution
FAQS on 2008 ford edge oil filter
Q: How often should I change the oil filter on my 2008 Ford Edge?
A: It’s recommended to change the oil filter on a 2008 Ford Edge every 3,000 to 7,000 miles, or as specified in the owner’s manual. It’s also a good idea to check the oil level and condition regularly and to have the oil and filter changed more often if the vehicle is driven under severe conditions such as heavy traffic, extreme temperatures, or frequent short trips.
Q: Can I use a different brand of oil filter on my 2008 Ford Edge?
A: While it’s possible to use a different brand of oil filter on a 2008 Ford Edge, it’s recommended to use a high-quality, OEM (original equipment manufacturer) filter. OEM filters are designed specifically for the make and model of the vehicle, ensuring a proper fit and function.
Q: What is the best type of oil filter for my 2008 Ford Edge?
A: The best type of oil filter for a 2008 Ford Edge is one that meets or exceeds OEM specifications and is recommended by the vehicle’s manufacturer. It’s also important to use a filter with high-quality construction, such as a filter with a silicone anti-drain back valve, to ensure proper oil flow and pressure.
Q: Can I change the oil filter on my 2008 Ford Edge myself?
A: Yes, you can change the oil filter on a 2008 Ford Edge yourself. However, it’s important to have the right tools and to follow the proper steps and procedures to ensure that the filter is installed correctly and tightened securely to prevent oil leaks. It’s also recommended to change the oil at the same time as changing the oil filter.
ALSO, READ MORE POSTS ON: